Sandblasting Laminated Glass Introduction
Laminated glass is made by sandwiching one or more interlayer film
between two layers of glass. There are several kinds of interlayer
and the most common ones are PVB EAV and SGP. The whole sheet then
will be put into the autoclave at certain temperature and pressure
according to the film type. In this way, the two layer of glass are
boned together by the interlayer film. In case of breakage, the
glass will hold together and not shatter into pieces. So it is a
kind of safety glass.
With the sandblasting process, different kinds of patterns can be
etched on the surface of the upper glass, adding more aesthetic
sense to the laminated glass.
Sandblasting Laminated Glass Specification
Color: Clear, Green, Blue, Bronze, Grey, Milk White, etc.
Thickness: 3+0.38+3mm, 4+0.38+4mm, 5+0.38+5mm, 6+0.38+6mm,
5+0.76+5mm, 6+0.76+6mm etc could be produced as per request.
Sizes: 1830x2440mm, 2134x3300mm, 2250x3300mm, etc. could be
produced as per request.